Transmission Mount, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the connection on the turbocharger. Refer to TURBOCHARGER CONNECTIONS, REMOVING AND INSTALLING .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Remove the battery tray -1-. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the Engine Control Module -J623- from the bracket. Refer to ENGINE CONTROL MODULE -J623-, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the bracket -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Depending on the version different brackets are installed.

-- Unclip the wiring guide -1- upward in direction of -arrows- and move it slightly to the side.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nut -arrow- and remove the ground cable.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Support the engine and transmission in the installation position. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .

-- Slightly pretension the engine/transmission assembly with the spindle, do not lift.

-- Remove the bolts -arrows- and the transmission mount -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.