LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine System (Cylinder Head & VALVETRAIN - Service Information - CRUA)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Valve Stem Seals, Removing And Installing >> Valve Stem Seals, Removing And Installing, Cylinder Head Removed >> Assembling

Valve Stem Seals, Removing And Installing, Cylinder Head Removed: Assembling

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Assembly is performed in reverse order.Note The Following: 

-- Make sure all the roller rocker levers lie correctly on the ends of the valve stems and are clipped onto the respective hydraulic lifters.

-- Install the camshaft housing. Refer to CAMSHAFT HOUSING, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals