LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine System (Cylinder Head & VALVETRAIN - Service Information - CRUA)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Valve Stem Seals, Removing And Installing >> Valve Stem Seals, Removing And Installing, Cylinder Head Installed >> Assembling

Valve Stem Seals, Removing And Installing, Cylinder Head Installed: Assembling

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Assemble in the reverse order of removal. Note The Following: 

-- Make sure all the roller rocker levers lie correctly on the ends of the valve stems and are clipped onto the respective hydraulic lifters.

-- Install the camshaft housing. Refer to CAMSHAFT HOUSING, REMOVING AND INSTALLING .

-- Install the glow plugs. Refer to GLOW PLUG, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals