LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine System (Cylinder Head & VALVETRAIN - Service Information - CRUA)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Camshaft Adjuster, Removing And Installing >> Installing

Camshaft Adjuster, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Between the camshaft adjuster and camshaft stub there is a diamond disc installed for connection security. Before installing it must be checked that this diamond disk is in the camshaft adjuster. Otherwise the camshaft adjuster can become loose while the engine is running and damage the engine.

Install In Reverse Order Of Removal And Note The Following: 

-- Install the upper toothed belt guard. Refer to TOOTHED BELT GUARD, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals