Lower Toothed Belt Guard, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal And Note The Following:

NOTE:

If a new toothed belt guard is installed, the guide tabs -arrow- must be disconnected before installing.

Toothed Belt Guard Tab

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Position the toothed belt guard, pay attention to the alignment pins -arrow- while doing so.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the toothed belt guard.

-- Install the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .