LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine System (Cylinder Head & VALVETRAIN - Service Information - CRUA)) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Cylinder Head Cover, Removing And Installing >> Installing

Cylinder Head Cover, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal And Note The Following: 

NOTE:

Replace the O-ring.

Replace the cylinder head cover gasket and the cylinder head cover bolts if they are damaged or if there are leaks.

-- Install the vacuum hose. Refer to CONNECTION DIAGRAM - VACUUM SYSTEM .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals