NOx SENSOR CONTROL MODULE -GX30-, REMOVING AND INSTALLING: Notes
WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Ring Wrench Set - Oxygen Sensor Probe Socket:3337/7
- Torque Wrench 1332 40-200 Nm :V.A.G 1332
- Torque Wrench 1332 Insert - Open Jaw - 22mm:VAG1332/12
The NOx Sensor Control Module -GX30- is comprised of the NOx Sensor -G295- with the NOx Sensor Control Module -J583-.