LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Diesel Fuel Injection System (Service Information - CRUA)) >> 23 Diesel Fuel Injection >> Sensors >> NOx SENSOR CONTROL MODULE -GX30-, REMOVING AND INSTALLING >> Installing

NOx SENSOR CONTROL MODULE -GX30-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Assemble In The Reverse Order Of Removal. Note The Following: 

-- Install the Left Front Power Window Control Module -J295- and tighten with the :3337/7  , the :VAG1332/12  and the :VAG1332  .

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals