NOx SENSOR 2 -G687-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the left center underbody trim panel. Refer to CENTER UNDERBODY PANELS, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nuts -arrows-.

-- Remove and free up the NOx Sensor Control Module -J583-.

-- Remove the NOx Sensor 2 -G687- -arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.