Fuel Low Pressure Temperature And Pressure Sensor -GX20-, Removing And Installing
WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Hose Clip Pliers:VAS6362
-- Remove the engine cover. Refer to ENGINE COVER .
-- Place a cloth near the high pressure pump to catch dripping fuel.
WARNING:
The Fuel Line Is Under Pressure.
Fuel poses a risk of injury to the eyes and skin.
Wear protective eyewear and protective clothing to avoid injury and contact with skin. Place a cleaning cloth around the connection point before loosening hose connections. Carefully open the connection point to release the pressure.
-- Unclip the fuel line -5- from the bracket -arrow-.
-- Release and disconnect the connector -4-.
-- Loosen the clamps -2-.
-- Remove the fuel lines -3 and 5-.