LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Diesel Fuel Injection System (Service Information - CRUA)) >> 23 Diesel Fuel Injection >> Intake Manifold >> Overview - Intake Manifold >> Intake Manifold With Charge Air Cooler - Tightening Specification And Sequence

Intake Manifold With Charge Air Cooler - Tightening Specification And Sequence

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Intake Manifold With Charge Air Cooler Tightening Sequence
GWWN23-10558Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts in steps:

Step Bolts Tightening Specification
1. -1 through 10- Install by hand all the way
2. -1 through 10- Tighten to 20 Nm
3. -1 through 10- 90° additional turn
scientia non olet · About LEMON Manuals