LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Diesel Fuel Injection System (Service Information - CRUA)) >> 23 Diesel Fuel Injection >> Fuel Injectors/High Pressure Reservoir (Rail) >> High Pressure Lines, Removing And Installing >> High Pressure Line Between High Pressure Reservoir (Rail) And High Pressure Pump, Removing >> Removing

High Pressure Line Between High Pressure Reservoir (Rail) And High Pressure Pump, Removing: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER .

-- Clean the fuel line and line connection with a cold cleaner and dry it with compressed air.

-- Remove the bolt -1-.

GWWA23-10371Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the union nuts -arrows- and then remove the high pressure line.