Engine Cooling System (Service Information - CRUA)

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

, Removing :

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Open the shut-off valve -B- and leave it open, so that the pressure in the cooling system reduces.

-- Remove the plug -3- from the coolant expansion tank and reconnect the bleeder hose -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Seal the flushing hose -1- with the plug.

-- Remove the valve block -1- and :VAG1274/8 -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- The coolant must be at the >>weld seam<< -arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If necessary, extract or add coolant.