LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Cooling System (Service Information - CRUA)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Cylinder Head Coolant Valve -N489-, Removing And Installing >> Removing

Cylinder Head Coolant Valve -N489-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the upper toothed belt guard. Refer to TOOTHED BELT GUARD, REMOVING AND INSTALLING .

-- Disconnect the connector -2- and free up the wire.

GWWA19-11580Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -3- and the Cylinder Head Coolant Valve - N489- -1-.

scientia non olet · About LEMON Manuals