LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Cooling System (Service Information - CRUA)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Right Front Coolant Pipe, Removing And Installing >> Removing

Right Front Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to DRAIN THE COOLANT .

-- Remove the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the A/C compressor from the bracket with the refrigerant hoses still connected (refer to A/C COMPRESSOR, REMOVING AND INSTALLING AT BRACKET and A/C COMPRESSOR, REMOVING AND INSTALLING ) and tie it up to the right side.

-- Loosen the hose clamps -1, 4, and 6- and remove the coolant hoses.

GWWA19-11283Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nut -5- and bolt -2-.

-- Free up the coolant hoses -3-, and remove the right front coolant pipe.