Rear Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Drain the coolant. Refer to DRAIN THE COOLANT .

-- Place the :VAS6208 underneath.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the clamp -4-, remove the coolant hose and drain the coolant.

-- Loosen the hose clamps -1- and remove the coolant hoses.

-- Remove the nut -3- and bolt -2-. Then remove the rear coolant pipe.