LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Cooling System (Service Information - CRUA)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Lower Front Coolant Pipe, Removing And Installing >> Installing

Lower Front Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal And Note The Following: 

NOTE:

Replace the seals and O-ring after removal.

Secure all hose connections with hose clamps that match the ones used in series production.

-- Clean and smooth out the seals and O-ring sealing surfaces.

-- Coat the seals and O-rings with coolant.

-- Install the oil filter housing. Refer to OIL FILTER HOUSING, REMOVING AND INSTALLING .

-- Connect the coolant hose to the connector coupling. Refer to Connect the Coolant Hose to the Connector Coupling .

-- Fill the coolant. Refer to COOLANT, FILLING . Used coolant cannot be used again.

scientia non olet · About LEMON Manuals