First Measurement
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
- The :T10303
remains installed.
-- Install the :VW387
on the transmission flange.
-- Place the -dial gauge button- on the input shaft.
 Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
|
-- Adjust the -dial gauge- pretension to >>0<<.
-- Raise the dual clutch up as far as the stop and note the measurement result.