Oil Pan Lower Section, Removing And Installing: Removing: Notes
WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Remove the right front wheel housing liners. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Release and remove the connector -arrow- from the Oil Level Thermal Sensor -G266-.
-- Loosen the fasteners -arrows- and remove the noise insulation -1-.
-- Drain the engine oil. Refer to maintenance service information.
-- Loosen and remove bolts -1 through 20- diagonally.