Install A Bolt For The Oil Pan Lower Section Eight Turns At The Threaded Hole -Arrow-.

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

At approximately eight turns the bonding loosens audibly.

Do not install the bolts with great force.

If the bolts are installed too far, the oil pan lower section can become deformed.

Do not bend when loosening the oil pan lower section bonding.

-- Insert the :T10383/2 at the loosened position -arrow-.

-- Place the opening on the :T10383/2 on the bolt.

-- Carefully drive in the wedge with a plastic mallet.

-- Carefully loosen the oil pan lower section from the bond.

-- Move the :T10383/2 and loosen the bonding on the other positions.