Cylinder Bore, Measuring
WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
-- Using a :VAS6078 measure in a diagonal sequence at three positions laterally -A- and longitudinally -B- .
- Maximum deviation from the nominal dimension: 0.10 mm.
NOTE:
Pay attention to scratches and other abnormalities on the cylinder wall.
| Cylinder Bore Diameter in mm | |
|---|---|
| Specified size | 81.03 |
NOTE:
The cylinder bore must not be measured when the cylinder block is mounted on the :VAS6095 because incorrect measurement is possible.