LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine System (Crankshaft & Cylinder Block - Service Information - CRUA)) >> 13 Crankshaft, Cylinder Block >> Pistons And Connecting Rod >> Overview - Pistons And Connecting Rod >> Bearing Shell Installation Position In The Connecting Rods

Bearing Shell Installation Position In The Connecting Rods

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
GWWN13-10566

-- Install the bearing shells in the center of the connecting rod and into the connecting rod bearing cap.

scientia non olet · About LEMON Manuals