Oil Spray Jets, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the oil pan. Refer to OIL PAN, REMOVING AND INSTALLING .

-- Turn the crankshaft at the vibration damper bolt in the direction of engine rotation until the respective bolt can be reached.

-- Remove the pressure relief valve -1- using the Socket:T10545 .

-- Remove the oil spray jet -2- .