Sub-Assembly Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the generator. Refer to OVERVIEW - GENERATOR .

-- Remove the high pressure pump. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING .

-- Remove the nut -2- and the bolt -1- .

-- Push the right front coolant pipe slightly forward.

-- Unclip the bracket -1- with the fuel hoses.

-- Remove the bolts -arrows- .

-- Remove the bolt -arrow- and remove the damper roller.

-- Loosen the bolts in the order -6 to 1- .

-- Remove the bolts and remove the sub-assembly bracket.