LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine System (Crankshaft & Cylinder Block - Service Information - CRUA)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt, Removing And Installing >> Installing >> Mount The Ribbed Belt On The Ribbed Belt Pulley:

Mount The Ribbed Belt On The Ribbed Belt Pulley:

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
GWWA13-10938
  1. Vibration Damper
  2. Tensioning Roller
  3. Generator
  4. A/C Compressor

-- Hold the tensioner with a wrench and remove the :T10060A  .

GWWA13-10949

-- Release the tension on the tensioner.

-- Check the ribbed belt for correct positioning.

-- Start the engine and check the ribbed belt routing.

scientia non olet · About LEMON Manuals