LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine System (Crankshaft & Cylinder Block - Service Information - CRUA)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Overview - Belt Pulley Side Sealing Flange >> Ribbed Belt Pulley Side Sealing Flange - Tightening Specifications And Sequence

Ribbed Belt Pulley Side Sealing Flange - Tightening Specifications And Sequence

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Ribbed Belt Pulley Side Sealing Flange Tightening Sequence
GWWA13-10948

-- Tighten the bolts in the steps shown in the sequence:

Step Bolts Tightening Specification
1. -1 through 10- Install by hand all the way
2. -1 to 6- Diagonally in stages to 13 Nm
3. -7 through 10- 13 Nm
scientia non olet · About LEMON Manuals