LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine System (Crankshaft & Cylinder Block - Service Information - CRUA)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Engine Support, Removing And Installing >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
Step Bolts Tightening Specification/Additional Turn
1. -1 to 3- 7 Nm
2. -1 to 3- 40 Nm
3. -1 to 3- 180° additional turn
scientia non olet · About LEMON Manuals