LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine System (Crankshaft & Cylinder Block - Service Information - CRUA)) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Crankshaft, Measuring Axial Clearance >> Procedure >> Notes

Crankshaft, Measuring Axial Clearance: Procedure: Notes

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
GWWA13-10955

-- Secure the :VAS6079  on the cylinder block with the :VW387  as shown and place it against the crankshaft.

-- Press the crankshaft against the dial gauge by hand.

-- Set the dial gauge to "0" .

-- Press the crankshaft off the dial gauge and read the measured value.

scientia non olet · About LEMON Manuals