Crankshaft Needle Bearing, Replacing: Notes

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Only for Vehicles Equipped with a DSG^® Transmission

Special Tools And Workshop Equipment Required

Counter Support:VAS251621
Internal Puller:VAS251605
Bearing Installer - Bearing Press Piece:VW207C

CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.

Mandatory Replacement Parts

Bearing Needle - Crankshaft

NOTE:

In vehicles with DSG^® transmission, the needle bearing must be installed at the rear in the crankshaft.

Conditions:

Always replace the needle bearing -arrow- after the engine and transmission are separated.
The front edges of the internal puller must not be broken off.