LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine System (Crankshaft & Cylinder Block - Service Information - CRUA)) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Crankshaft Needle Bearing, Replacing >> Needle Bearing, Removing

Needle Bearing, Removing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
GWWM13-10020

-- Remove the needle bearing -1- from the crankshaft -2- using a commercially available internal puller, for example :VAS251605  , and a counter-support, for example :VAS251621  .

-- The internal puller must be positioned behind the needle rim -arrow- .

scientia non olet · About LEMON Manuals