Flange Shaft Ball Bearing, Replacing: Installing
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
- The offset side of the : VW473 faces the ball bearing.
- Place the : VW473 centered on the ball bearing.
- The plastic container -A- must not be damaged.
-- Install the flange shaft ball bearing all the way.
-- Secure the ball bearing with a new circlip.
-- Install the flange shaft seal. Refer to Figure.
-- Install the flange shaft. Refer to Figure.
-- Install front axle differential lock. Refer to FRONT AXLE DIFFERENTIAL LOCK, INSTALLING .