Differential, Disassembling And Assembling, Fwd: Notes
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Press Plate:VW402
- Press Piece - Rod:VW408A
- Press Piece - Multiple Use:VW412
- Press Piece - 60mm:VW415A
- Press Piece - Multiple Use:40-105
- Press Piece - Multiple Use:3005
- Press Piece - Bushing:3259
- Press Piece - Reverse Gear Syncro:3296
- Bearing Installer - Wheel Bearing:3345
- Puller - Taper Roller Bearing:VAG1582
- Puller - Taper Roller Bearing - Adapter 6A:VAG1582/6A
- -1- Internal Puller:VAS251615 (21-7)
- -2- Puller:VAS251417 (18-1)
- -3- Splitter:VAS251409 (17-1)
- -4- Counter Support:VAS251623 (22-2)
- Inductive Heater:VAS6414
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Seal - Right Flange Shaft