LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Final Drive & Differential Systems (Service Information - 6-Speed Manual Transmission - 02Q)) >> 39 Final Drive, Differential >> Differential >> Differential, Disassembling And Assembling >> Differential, Disassembling And Assembling, Fwd >> Installing the Spring Pin for the Differential Bevel Gear Axle

Installing the Spring Pin for the Differential Bevel Gear Axle

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
GWWA39-10601Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Align the hole in the differential bevel gear axle to the hole in the differential housing.

-- Using a drift, install the adapter sleeve -1- to the dimension -a- = 2.5 ± 0.5 mm.

scientia non olet · About LEMON Manuals