Removing the Outer Race/Tapered Roller Bearing from the Clutch Housing

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A -:VAS251623 (22-2)

B -:VAS251615 (21-7)

-- Tension the internal puller -B- between the outer race/tapered roller bearing and the shim.

NOTE:

Tension the Internal Puller -B- between the outer race/tapered roller bearing and shim tightly -item ) OVERVIEW - DIFFERENTIAL, AWD AND FWD WITH FRONT AXLE DIFFERENTIAL LOCK - Washer.

Replace the washer after removing it -item ) OVERVIEW - DIFFERENTIAL, AWD AND FWD WITH FRONT AXLE DIFFERENTIAL LOCK - Washer.

The :VAS6775 (21/8) can also be used instead of the :VAS251615 (21-7).