Removing the Bearing Inner Race/Taper Roller Bearing
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
-- Place the :40-105 on the differential housing.
-- Tension the :VAS251007 (204-2) -A- in the area of the flattened sides on the differential housing under the bearing inner race.
NOTE:
When removing the bearing inner race, make sure the hooks do not bend outward; if necessary tighten bolt -arrow-.