Needle Bearing (Polygon Bearing) And Needle Bearing Seal On The Right Flange Shaft, Replacing: Removing

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the flange shaft and the right seal. Refer to RIGHT SEAL, REPLACING, AWD .

Now mount the :T10047 as follows:

-- Line Up Both Parts Of The Tool So That The Markings "B" Face Each Other.

-- The depressions -arrows- must be under the bearing.

-- Attach both halves to each other.

-- Pry the locking ring -A- out of the needle bearing.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- So that the bearing contact surface on the shaft is not damaged, the shaft must be rotated during the pressing procedure -arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the seal -A- from the groove -arrow-.