LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Turbocharger System (Service Information - CRUA)) >> 21 Turbocharger, Supercharger >> Turbocharger >> Turbocharger Connections, Removing And Installing >> Installing

Turbocharger Connections, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal And Note The Following: 

-- Loosen the screw-type clamp between the connection and the air duct hose -3-.

-- Remove the air duct hose.

-- Position the connection so that the guides are in front of the locking mechanism.

-- Insert the connection and turn forward all the way.

-- Connect the air duct hose to the connection.

-- Tighten the screw-type clamp -3-.

Further Installation Is The Reverse Order Of Removal. 

scientia non olet · About LEMON Manuals