Emissions Control Module Bracket - Tightening Specifications And Tightening Sequences
WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
-- Bring the bracket into the installed position.
-- Tighten the bolts in steps according to the sequence:
| Step |
Bolts |
Tightening Specifications |
| 1. |
-1, 2, 3, and 4- |
Install by hand all the way |
| 2. |
-2- |
20 Nm |
| 3. |
-1- |
40 Nm |
| 4. |
-3 and 4- |
40 Nm |