Charge Air Pressure Sensor -G31-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Spray the hose on the Charge Air Pressure Sensor - G31- with solvent before disconnecting.

CAUTION:

There is a risk of damaging the charge air pressure sensor by breaking the connection.

Remove the hose carefully and evenly from the connection.

-- Remove the bolts -2- and the Charge Air Pressure Sensor -G31-.