Right Seal, Replacing: Installing: Notes
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
-- Lightly oil the new seal -1- on the outer diameter. Drive in the seal using the :T10049 , without tilting to the dimension -a-.
- Dimension -a- = 4.8 ± 0.1 mm; Measured from the housing flat surface to seal.
- Do not drive in the seal all the way.
- Maintain a parallel alignment of a maximum 0.25 mm between the seal -1- to the housing flat surface.
-- Fill the space between the sealing lip and the dust lip halfway with Sealing Grease.