Left Seal, Replacing: Removing

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the left drive axle. Refer to DRIVE AXLE .

-- Prepare the :VW771 with a washer -a- and two sleeves from the :VW540/1B as illustrated.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The following illustrations show the final drive removed.

-- Remove the spindle from the bridge from the :VAS251415 (Kukko 18-0) and install the :3282/34 for this.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Attach the bridge -A- with two M8 x 30 bolts -arrows- to the flange shaft.

-- Install the :VW771 and flange shaft.

-- Pry off the flange shaft seal with the :VW681 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.