LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Rear Final Drive System (Service Information - 02QA, 0D9, 0D9A)) >> 39 Final Drive, Differential >> SUBFRAME Mount >> Bonded Rubber Bushing, Removing And Installing >> Installing the Lower Front A and Upper Front B Bonded Rubber Bushings >> Notes

Installing the Lower Front A and Upper Front B Bonded Rubber Bushings: Notes

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
GWWN34-10741Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lay a washer with an >>internal diameter of 15 mm<< and an >>outer diameter of a minimum of 27 mm<< on the :3346/2  before it is installed.