Right Seal, Replacing, AWD: Removing
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission is installed.
-- Remove the noise insulation. Refer to NOISE INSULATION .
-- Remove the right drive axle. Refer to DRIVE AXLE .
-- Place the :SMN372500 or Drip Tray under the transmission.
-- Pry out the seal on the transmission using the :T20143/1 or :T20143/2 .