Right Seal, Replacing, AWD: Installing

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Lightly oil the new gasket on the outer edge.

-- Fill the space between the sealing lip and the dust lip halfway with Sealing Grease.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Carefully install the new seal all the way using the :T10243 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the bevel box. Refer to BEVEL BOX, INSTALLING .

-- Install the drive axle. Refer to DRIVE AXLE .

-- Check the fluid level and fill if necessary. Refer to TRANSMISSION FLUID LEVEL, CHECKING .

-- Install the noise insulation. Refer to NOISE INSULATION .