Left Seal, Replacing: Installing
Install in the reverse order of removal while noting the following:
-- Lightly oil the new gasket on the outer edge.
-- Fill the area between the sealing/dust lip -arrow- halfway with Sealing Grease.
-- Install the seal all the way in without tilting it.
Press the flange shaft against the transmission so that the bolt in the threaded piece of the differential touches.
-- Insert the flange shaft and secure it with bolts.
-- To install the flange shaft, install two bolts into the flange and counterhold it using a pry bar.
-- Install the left drive axle. Refer to DRIVE AXLE .
-- Install the left front wheel housing liner. Refer to WHEEL HOUSING LINER .
-- Attach the front left wheel. Refer to WHEELS AND TIRES .
-- Check the fluid level and fill if necessary. Refer to TRANSMISSION FLUID LEVEL, CHECKING .
-- Install the noise insulation. Refer to NOISE INSULATION .