Gear Oil Level, Checking And Filling: Notes
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Charging Device For BorgWarner Coupling 2:VAS6291A
- Charging Device For BorgWarner Coupling 2 - Adapter 2:VAS6291/2
- Torque Wrench 1331 5-50Nm:VAG1331
- Shop Crane - Drip Tray:VAS6208
The Bevel Box Is Attached to the Side of the Transmission and Has Its Own Oil System.
Transmission fluid specification for the bevel box.
Requirements
- Bevel box must be in the installation position.
-- Remove the noise insulation. Refer to NOISE INSULATION .
-- If equipped, remove the right drive axle heat shield from the bevel box -arrows-. Refer to DRIVE AXLE .
-- Place the :VAS6208 underneath.
NOTE:
Cover the area under the drain plug -arrow- with a cloth.