Removing And Installing Flange Shaft.(VW771, Completing with VW540/1B.)
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
-a- = washer
-- Bolt the flange shaft to the :VW771 and remove it.
NOTE:
The flange shaft is secured with a circlip -arrow-.
Please check whether the circlip -arrow- is equipped.
If necessary, remove the circlip from the seal area -1- or near the ball bearing -2-.
-- Pry the seal -1- out of the flange shaft with a lever.