Right Seal On Bevel Box, Replacing: Installing

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

-- Fill the area between the sealing lip and dust lip -Arrow- halfway with Sealing Grease.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the seal all the way in without tilting it.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the flange shaft. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .

-- Install the drive axle. Refer to DRIVE AXLE .

-- If equipped, attach the drive axle heat shield to the bevel box. Refer to DRIVE AXLE .

-- Check the level of the axle oil inside the bevel box. Refer to GEAR OIL LEVEL, CHECKING AND FILLING .

-- Install the noise insulation. Refer to NOISE INSULATION .