Left Seal Between Bevel Box And Transmission, Replacing

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Crankshaft/Power Steering Seal:T20143
Seal Installer - Bevel Box:T10298
Sealing Grease.

-- Remove the bevel box. Refer to BEVEL BOX, REMOVING .

-- Pry out the seal on bevel box using the :T20143

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Fill the area between the sealing lip and dust lip -Arrow- halfway with Sealing Grease.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lightly lubricate the outer edge of the gasket.

-- Install the seal all the way using the :T10298 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the bevel box. Refer to BEVEL BOX, INSTALLING .