LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Exhaust & Emissions Controls System (Service Information - CRUA)) >> 26 Exhaust System, Emission Controls >> Selective Catalytic Reduction System >> Reducing Agent Tank, Removing And Installing >> Installing

Reducing Agent Tank, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal And Note The Following: 

-- Make sure the lines are clipped to the reducing agent tank.

-- Pull on the lines to make sure they are secure.

-- Adapt the adaptation value for the SCR system after draining reducing agent or replacing components. Refer to SELECTIVE CATALYTIC REDUCTION (SCR) SYSTEM ADAPTATION VALUE, ADAPTING .